Contract

TitleRemove and replace the Emergency Generator Pad and associated equipment at bldg 1060 Beale AFB CA 95903 Description Furnish all labor supervision transportation equipment tools materials and operations as required to perform the following Remove and replace an emergency generator pad and associated equipment provide a complete electrically supervised emergency generator backup system at bldg 1060 Beale AFB Provide a temporary double throw switch 3 phase 200KVA 480V and distribution cables total approx 300 feet Switch the existing load to the temporary circuit for the duration of the contract performance period Remove existing concrete pad load cables conduits chain link fencing approx 73 lineal feet and fuel tank with concrete supports Lay new conduits cabling electrical ground system concrete pad and fencing Provide approx 60 lineal feet of buried cable conduit Provide a reinforced concrete pad type foundation not less than 8 inches thick Install approx 75 lineal feet of 8 tall chain link fence including a 4ft wide gate Install government provided 200KVA generator set automatic transfer switch double throw switch and surge suppressor on the line side of the ATS Provide and install a commercial breaker Provide and install channel iron support frame for commercial breaker and double throw switch Provide and install approx 300 feet of electrical distribution cable Provide the system complete and ready for operation Equipment materials installation workmanship inspection and testing shall be in strict accordance with the required and advisory provisions of the NEC NFPA 70 and IEEE C2 except as modified herein Furnish materials and equipment that are current products of one manufacturer regularly engaged in the production of such equipment EXISTING SYSTEM Contractor shall provide a temporary double throw switch connected to the polemounted transformers and circuits to the master switches at building 1060 and the tower The government will provide a temporary generator to connect to the double throw switch Contractor will be responsible to coordinate all power outages with Base Operations and minimize downtime CODES Contractor shall comply with the latest edition of the NEC NFPA 70 IEEE C2 for electrical and ASTM C39 ASTM C94 ASTM C150 ASSTM C309 AASHTO M182 COE CRDC400 NRMCA TMMB01 NRMCA QC3 for concrete and all other applicable laws and regulations QUALIFICATIONS OF INSTALLER Prior to installation submit data for approval of the Contracting Officer showing that the Contractor has successfully installed generator systems of the same type and design as specified herein or that he has a firm contractual agreement with a subcontractor having such required experience The data shall include the names and locations of at least two installations where the Contractor or the subcontractor referred to above has installed such systems The Contractor shall indicate the type and design of each system and certify that each system has performed satisfactorily in the manner intended for a period of not less than 18 months TECHNICAL REPRESENTATIVE Furnish the services of a qualified power production expert or technician experienced in the installation and operation of the type of system being provided to supervise the installation and testing including formal testing and adjustment of the system Magnitude of this project is between 2500000 and 10000000 SIC is 1542 The size standard is 17 Million This solicitation is open to all business concerns The entire solicitation will be released solely on the Electronic Posting System EPS wwwepsgov paper copies will not be available Any prospective bidders interested in bidding on this solicitation MUST register in order to be placed on the bidder list Include your company name address telephone number and point of contact fax number and email address This list is provided to facilitate subcontracting opportunities only Bidders registering their name on the source list should not conclude that they would receive a paper copy of the solicitation in the mail as a paper copy will not be available All prospective bidders are responsible to visit the EPS frequently and obtain any amendments or other information pertaining to this solicitation The solicitation attachments specifications drawings and bidders list will only be available by downloading the documents from the EPS Tentative date that solicitation will be released solely on the EPS will be 26 April 00 Tentative bid opening date will be 10 May 00 Specific issue and opening dates to be identified on solicitation When issued the solicitation package with the specifications will be available for download as word documents or zipped compressed files The drawings will be available for download as a selfextracting zip file Once executed the file will install the free SourceView reader and the drawings can then be viewed and printed A free evaluation version of Winzip can be obtained from httpwwwwinzipcomwinzipdownloadhtm once unzipped all files are word documents Any changes to solicitation documents or specifications will render them invalid Bids containing any changes will be rejected Contractors must be registered in the Centralized Contractor Registration in order to receive a contract award from any DOD activity Contractors may access the CCR at httpccredidisamil For more information concerning Business Opportunities at Beale AFB please visit our website at httpwwwbealeafmil9LG9CONSindexhtm

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4686 9 CONS PKP

This is a Request for Quotation RFQ being issued in addition to an EDIFACNET solicitation These announcements constitute the only solicitation quotations are being requested and a written solicitation will not be issued This acquisition is set aside 100 for small business The Standard Industrial Classification code is 3542 The size standard is 500 employees This acquistion consists of nine 9line items All line items to be awarded in the aggregate 0001 Die Male 12ft standard tongue 90 degree for standard press brake Accurate Mfg Company Dinamic pn P1A or equal QTY 1ea 0002 Die Female for 16 gauge 6ft long standard tongue for standard press brake Accurate mfg Dinamic pn D2 or equal QTY 1ea0003 Die Female for 11 gauge 6 ft long standard tongur for standard press brake Accurate mfg Dinamic pn D2 or equal QTY 1ea0004 Die Female 2 12 in bar for 316 steel standard tongue 6 ft long for standard press brake Accurate mfg Dinamic pn D4 or equal QTY 1ea 0005 Die Female 3 inch bar for 14 in steel standard tongue 6 ft long for standard press brake Accurate mfg Dinamic pn D4 or equal QTY 1ea 0006 Die Male gooseneck 1 12 in bar standard tongue 12 ft long for standard press brake accurate mfg Dinamic pn PGC or equal QTY 1ea 0007 Die Male 1 14 inch bar 6 ft long for standard press brake accurate mfg Dinamic pn P23A or equal QTY 1ea 0008 Die Female 1 12 in bar for 14 gauge 6 ft long Accurate mfg Dinamic pn D22 or equal QTY 1ea 0009 Die MaleFemale set 12 ft long Accurate mfg Dinamic pn P16CD16C or equal QTY 1ea If bidding or equal include product specifications FOB Destination Acceptance destination Shipping from and delivery to Holloman AFB NM Offerors should include a completed copy of FAR 522123 Offeror Representations and Certifications with their quote The Offeror is required to provide their Contractors DUNS Number and Commercial and Government Entity CAGE code with their offer The CAGE code entered must be for that name and address provided by the contractor Offers are required to be registered in the Central Contractor Registration database CCR Facsimile quotes will be accepted at 5055727333 All responsible sources may submit an offer which will be considered

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4801 49 CONS PK

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4626 341 CONS LGC

No Description Provided

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency GENERAL SERVICES ADMINISTRATION
• Subtier OFFICE OF ADMINISTRATIVE SERVICES
• Office OFFICE OF MANAGEMENT SERVICES

SMALL BUSINESS SETASIDE NOTICE OF EXPORT CONTROL DATADRAWINGS APPLIES PUNCH SET COMPRESSOR PISTON PNPWA57433 NSN5120013055446YM

• Department/Ind.Agency
• Subtier
• Office

TABLE POSITIONING APPL PMEL PN CD12ALMS720 NSN 5220014091793

• Department/Ind.Agency
• Subtier
• Office

This is the SECOND REQUEST for sources sought in connection with the direct conversion of the Air Operations Squadron Aircraft Delivery Flight Delivery Control Center originally posted to EPS on 22 March 2000 ACCONS0001 This sources sought synopsis is limited small business concerns ONLY This direct conversion will be conducted in accordance with the Air Force Commercial Activities Policy Instruction that implements the Office of Management and Budget OMB A76 Performance of Commercial Activities This circular reaffirms the Governments policy to rely on the private sector for products and services The contractor will be required to provide all management supervision labor training tools equipment transportation and materials necessary to operate the Delivery Control Center in support of the Air Operations Squadron at Langley Air Force Base Virginia as defined in the draft statement of work attachment 1 Please be advised that this SOW is merely a DRAFT at this time and various changes may likely be included in the final SOW once released This draft SOW is provided to give companies an overview of the overall services to be requested The mission of the Center is to provide the safe and timely worldwide delivery of approximately 200 to 300 transoceanic sorties per month for Department of Defense and Foreign Military aircraft The Delivery Control Center serves as the command and control function for continuous monitoring of all aircraft deliveries and reports directly to the Air Operations Squadron Commander The Center is required to coordinate with higher military headquarters elements US and Foreign embassies national and international aviation agencies enroute military support installations overseas military delivery elements and Delivery Control Officers DCO to effect timely and safe aircraft delivery The Center makes timesensitive inputs concerning deployment timing refueling support and missed air refueling abort bases At this time we will create an official Source List Interested offerors are requested to add their names to the Source List by emailing the contract manager Lois Nicholson at loisnicholsonlangleyafmil of faxing a request to her attention at 7577649773 Offerors should cite the reference number F4465000Q0003 indicate whether their firm is a small business small disadvantaged business or a womanowned business and include a complete mailing address phonefax numbers and email address In order that we may fully understand a companys capability to perform the required services and establish our acquisition strategy we request submission of additional information that outlines your companys ability to perform the work anticipated under this acquisition It should be emphasized that this request IS NOT a request for proposals HoweverIT IS VERY IMPORTANT THAT INTERESTED COMPANIES REVIEW THE DRAFT SOW ATTACHMENT 1 AND PROVIDE RESPONSES THAT SPECIFICALLY ADDRESS THE INFORMATION REQUESTED IN PARAGRAPHS a THROUGH d BELOW NLT 400 PM ON 21 APRIL 2000 RESPONSES ARE LIMITED TO 5 PAGES Please limit your submissions to the information requested ONLY a Statement that your company is certified and qualifies as either a small business small disadvantaged business or women owned business in Standard Industrial Classification SIC 8744 5 million Facilities Support Management Services b A capability statement that provides brief information on your companys managerial technical and financial resources to be able to meet the program requirements as detailed in draft SOW SPECIFICALLY ensure that this statement adequately addresses your companys ability to recruit hire andor retain personnel that meet the qualifications of paragraphs 51 including subparagraphs 511 through 516 and paragraph 56 of draft SOW support the staffing and operations requirements in paragraph 55 meet any upfront capital investment manage and integrate subcontract efforts provide a quality control system capable of identifying correcting and preventing initialrecurring discrepancies that meets the governments inspectionquality requirements in accordance with paragraph 52 of the draft SOW and perform center management mission planningexecution and administrative functions in accordance with paragraphs 12 through 15 of the draft SOW c References and relevant data that include a brief description of the contract point of contact and phone number for SIMILAR past or current performance accomplished for the government or commercially d Statement as to whether your company intends to bid as a prime contractor for this effort This information will be used only for market research purposes and will not be used as a part of proposal evaluation later All information received will be protected and safeguarded as ACQUISITIONSOURCE SELECTION SENSITIVE in accordance with FAR Part 3104 Procurement Integrity Please direct any questions to Lois Nicholson at 757 7644175 email loisnicholsonlangleyafmil or Darryl Mitchell at 757 7644737 email mitchedg1langleyafmil ACC CONS and the AOS anticipate hosting a formal site visit shortly after the release of the actual RFP The formal site visit will include a preproposal conference Your may also take this opportunity to provide comments on the draft SOW to the individuals identified above Any comments on the Draft SOW should be provided separately from the information requested above Please forward your comments to ACC Contracting SquadronLGCT 130 Douglas Street Suite 402 Langley AFB VA236652791

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4890 HQ ACC AMIC

Presolicitation NoticeDate Submitted 12APR2000 OCALCPKOE DIR OF CONTRACTING 7858 5TH ST STE 1 TINKER AIR FORCE BASE OK 731459106 Z REPLACE AUTO ENTRY DOORS B477 SOL F3465000Q0491 DUE 051500 For additional information contact Jimmie CosbyPkoe4057394182 Contractor shall furnish all labor tools equipment plant material parts transportation and incidentals necessary to Replace Automatic Entry Doors Commissary B477 Tinker AFB OK The period of performance is 90 days Work requirement consists of 100 Mechanical Magniutde of construction is between 2500000 and 10000000 This acquisition is unrestricted Access to the solicitation plans and any pertinent information including amendments can be found at httpwwwepsgov This serves as a combination Synopsis and Presolicitation Notice as required by FAR 362132 Any contractors receiving this as a presolicitation notice and does not want to receive future preinvitation notices should advise this office Point of contact is Jimmie Cosby 4057394182 or jimmiecosbytinkerafmil Any reference to written or faxed requests for this solicitation is system generated and should be disregarded The approximate issueresponse date will be 13 Apr 2000 The anticipated award date will be 01 Jun 2000 Electronic procedure will be used for this solicitation See our Web page This solicitation number F3465000Q0491 replaces solicitation number F3465000R0041 httpcontractingtinkerafmil

• Department/Ind.Agency
• Subtier
• Office

This is a Request for Quotation RFQ being issued in addition to an EDI FACNET solicitation These announcements constitute the only solicitation quotations are being requested and a written solicitation will not be issued This acquisition is setaside 100 for small business The size code is 100 employees The Standard Industrial Code is 5045 This solicitation consists of one 1 line item Line Item 0001 1 Each Fibre Channel Storage Solution Fully redundant with the following specifications 2 Each Fibre Channel Switches Dualported Fibre Channel hard drives 4 Each 64 bit66 MHZ Fibre Channel host bus adapter cards provides redundancy for 2 Dell PowerEdge servers System storage scalability to at least 17 Terabytes Minimum storage capacity of 360 Gigabytes Redundant hotswappable power supplies Redundant hotswappable cooling fans System installation to include server Same day 4hour response onsite maintenance contract 3 year 7x24 parts and labor warranty Vendor must be authorized to provide warranty service on Dell PowerEdge Servers 2 Dell PowerEdge servers will be attached to the Fibre Channel switches Or Equal The attached Clauses apply to this solicitation The Offerors must be CCR Central Contractor Registration The Offeror is required to provide their Contractors DUNS Number and Commercial and Government Entity CAGE Code with their offer Facsimile quotes will be accepted at 505 5727333 Offeror must complete copy of FAR 522123 Offeror Representation and Certifications Commercial Items with their quote which is attached Prefer FOB Destination Delivery Date 30 Days ARO

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4801 49 CONS PK