Contract

NAICS 233320 Provide all material equipment and labor necessary to perform the work specified in this solicitation Work will be accomplished in a building with courtrooms under conditions where added requirements will be necessary for noiseand environment limiting requirements and factors Work will involve renovation with elevator replacement as an option that may be excerised in the US Marshals Service office at the Federal BuildingCourthouse in Muskogee Oklahoma Estimated cost range is 1000000 to 5000000 Solicitation GS07P02UDC1001 Project ROK02054 This project is being procured as a SBA 8A HUBZone SetAside for small businesses in Oklahoma resulting in a Firm Fixed Price contract The prime contractor and each of his subcontractors will be required to submit three references for their construction speciality ie elevator electrical and others This solicitation will not be placed on the internet and must be requested from the Contracting Officer Steven F Clark in writing on company letterhead Only firms that are 8A and HUBZone certified need request the solicitation Mentoring and parnershipping should be discussed with the Small Business Administration if bonding is a problem Bid packages will be available about November 15 2001 with an approximate bid opening date of December 17 2001 Bid packages may be requested by fax 8179783974

• Department/Ind.Agency
• Subtier
• Office

s for electronic access to Standard Poors CUSIP master data file The SEC requires CUSIP data including 9character CUSIP numbers and standardized descriptions in electronic format The CUSIP system is a standard numbering and descriptive methodology utilized throughout the financial community for identifying securities SEC staff uses CUSIP information to conduct investigations and enforcement actions as well as to perform examinations and inspections The CUSIP data must be organized in three files Issuer Issue and Issue Attributes and must be available for transmission via ftp file transfer protocol The master file must be delivered to initialize service Updates must also be delivered in the same format as the master file The data updates must be available intraday daily and weekly The updates must contain addit

• Department/Ind.Agency SECURITIES AND EXCHANGE COMMISSION
• Subtier SECURITIES AND EXCHANGE COMMISSION
• Office SECURITIES AND EXCHANGE COMMISSION

1 P2 1102 3 2001 4 GPO391088 5 731453032 6 28 7 OCALCLPDPB Dir ContractingPropulsion 3001 Staff Dr STE 2AE1 106C Tinker Air Force Base OK 731453032 8 28 Ring Mating Seal 9 F3460102Q0027 10 121901 11 OCALCPKXDA Tinker AFB OK 731453015 For additional information contact Georgette StrubLPDPB4057394382 12 NA 13 NA 14 NA 15 NA 16 NA 17 Item 0001 NSN 2840011469392JF PN 9976M66P08 Steel AMS 6322 2976 in long 808 in min and 8082 in max id 10958 in min and 10962 in max OD15 holes 262 min 270 Max dia 16 holes 099 in min and 104 max dia F101GB102 Engine B1B Aircraft 21AB Applicable to F101 Destn Tinker Air Force Base OK 731453032 Delivery 29 Mar 2002 Qualification Requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9202A do not apply These qualification requirements apply to line itemss 0001 The approximate issueresponse date will be 29 Nov 2001 The anticipated award date will be 31 Jan 2001 Written procedures will be used for this solicitation No telephone requests Posting to Fed Biz Ops is the only mean of solicitation All responsible sources solicited may submit a bid proposal or quotation which shall be considered Award will be made only if the offeror the productservice or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 522091 The solicitation obtained concerning qualification requirement as cited in each individual solicitation Note An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call the Ombudsman at 4057363273 DO NOT CALL THIS NUMBER FOR SOLICIATION REQUESTS The solicitation will be posted to the Fed Biz Ops at httpwwwepsgov No written solicitation will be issued Request for written quotation will be posted electronically to the Fed Biz Ops The anticipated award date will be 60 days after the issuance of this notice See Note s 1 26 18 httpswwwepsgovcgibinWebObjectsEPSACodePLocID902 19 Click here to reach Tinker AFB Central Contracting Synopses at EPS 20 georgettestrubtinker afmil

• Department/Ind.Agency
• Subtier
• Office

Services NonPersonal Overhaul The contractor shall provide all labor facilities equipment and all material to accomplish the overhaul test packing and packaging and return to the government in accordance with the specifications contained in the contract the line items of Air Force equipment listed below A firm fixed price type contract is contemplated for One Year plus four Oneyear options for CLIN 0001 The item and estimated quantities are as followsCLIN 0001 NSN 6115012245848 PN 28B589B Noun Generator Application C130H Aircraft Qty Basic year 81 each Option I 76 each Option II 85 each Option III 87 each Option IV 89 each CLIN 0002 Data and Reports IAW DD Form 1423 CLIN 0003 Over and Above as required An initial production evaluation IPE is also required for the end items An IPE is a planned Government review of early production items and processes to evaluate a contractors capability to complete the work stipulated in the contract and in accordance with the technical order TO or other guidance stipulated in the PWS or both the TO and other guidance stipulated in the PWS This solicitation is to obtain requirements type overhaul contract with 100 contractor furnished material The approximate issueresponse date will be 04 JAN 02 Deliveries are to be at a rate as follows CLIN 0001 8 each per month 30 days ARO reps and order No telephone requests Only written or faxed requests received directly from the requestor are acceptable All responsible sources solicited may submit a proposal which shall be considered Reply Fax Number is 4057393462 email is katherinelindleytinkerafmil ATTN KATHERINE LINDLEY Qualification Requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement Authority 10 USC 2304C1 Justification Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one or a limited number of sources under the authority of FAR 6302 Interested persons may identify their interest and capability to respond to the requirement or submit proposals This notice of intent is not a request for competitive proposals However all proposals received within forty fivedays after date of publication of this synopsis will be considered by the Government A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement Award will be made only if the offeror the service or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 522091 The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firms listed Specifications plans or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government Note An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnelWhen requested the Ombudsman will maintain strict confidentiality as to source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call the Ombudsman at 4057363273 DO NOT CALL THIS NUMBER FOR SOLICITAION REQUESTS Note Faxed solicitation requests can be submitted to OCALCPKXDA Tinker AFB OK 731453015 FAX NUMBER 4057393656

• Department/Ind.Agency
• Subtier
• Office

PR Number FD20200261501 Item 0001 NSN 1620012521049 PN 2007003103 Diameter 4 X 48 L weight CMIL98844 Class 3 functionused MIL98844 Clas s 3 functionused as a major aircraft structural support member during takeoff landing and other ground operations 43ea Alt qty A 66ea Alt qty B 70ea Applicable to F16 Destn Hill Air Force Base Ut 840565825 Delivery 31 DEC 2001 43 ea Alternate delivery quantities Alt A 31 DEC 2001 66 ea Alt B 31 DEC 2001 70 ea Item 0002 data 1 lot Qualification requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement The requirements of FAR 9202A have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation These qualification requirements apply to line items 0001 Electronic procedure will be used for this solicitation See our Web page To Sp Aerospace Vehicle Systems BV Geldrop Nl To Israel Aircraft Industries To West Heights To Coltec Industries Inc Euless Tx 760407012 To Special Projects Mfg Co Ft Worth TX First article test required Authority 10 USC 2304C1 Justification Supplies or Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements Award will be made only if the offeror the productservice or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 522091 The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firms listed An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to the source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer 8017776991 ATTENTION Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity Information on registration and annual confirmation requirements may be obtained by calling 18882272423 or via the Internet at httpwwwccr2000com This part required engineering source approval by the design control activity in order to maintain the quality of the part Existing unique design capability engineering skills and manufacturing knowledge by the qualified sources require acquisition of the part from the approved sources The approved sources retain data rights manufacturing knowledge or technical data that are not economically available to the Government and the data or knowledge is essential to maintaining the quality of the part An alternate source must qualify in accordance with the design control activitys procedures as approved by the cognizant Government engineering activity The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application This acquisition involves data that are subject to export control laws and regulations Only contractors who are registered and certified with the Defense Logistics Services Center DLSC shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions Contact the Defense Logistics Services Center 74 Washington Avenue N Battle Creek Michigan 409173084 18003523572 for further information on the certification process You must submit a copy of your approved DD Form 2345 Military Critical Technical Data Agreement with your request for the solicitation See Note s 22

• Department/Ind.Agency
• Subtier
• Office

PR Number FD20200261497 Item 0001 NSN 1650001157401LE PN 4G51439108A Used on the C5 Acft A complex fitting for closing end of tube Covers end of steering cyl and provides a means for hyd fluid movement Mat steel Dim 95 long 6 wide 5 high 17ea Applicable to C5 Acft Destn Hill Air Force Base Ut 840565825 Delivery 31 MAR 2004 6 ea 30 SEP 2004 6 ea 30 JUN 2004 5 e Item 0002 data 1 lot Qualification requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement The requirements of FAR 9202A have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation These qualification requirements apply to line items 0001 The anticipated award date will be 10 DEC 2001 Electronic procedure will be used for this solicitation See our Web page To All Tools Inc Cleveland Oh 441441105 To Heroux Inc Quebec Canada J4h3n2 Ca To Canadian Commercial Corporation Ontario K1a 0s6 Ca S First article test required Authority 10 USC 2304C1 Justification Supplies or Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements Award will be made only if the offeror the productservice or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 522091 The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firms listed An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to the source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer 8017776991 ATTENTION Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity Information on registration and annual confirmation requirements may be obtained by calling 18882272423 or via the Internet at httpwwwccr2000com This part required engineering source approval by the design control activity in order to maintain the quality of the part Existing unique design capability engineering skills and manufacturing knowledge by the qualified sources require acquisition of the part from the approved sources The approved sources retain data rights manufacturing knowledge or technical data that are not economically available to the Government and the data or knowledge is essential to maintaining the quality of the part An alternate source must qualify in accordance with the design control activitys procedures as approved by the cognizant Government engineering activity The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application This acquisition involves data that are subject to export control laws and regulations Only contractors who are registered and certified with the Defense Logistics Services Center DLSC shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions Contactthe Defense Logistics Services Center 74 Washington Avenue N Battle Creek Michigan 409173084 18003523572 for further information on the certification process You must submit a copy of your approved DD Form 2345 Military Critical Technical Data Agreement with your request for the solicitation See Note s 26

• Department/Ind.Agency
• Subtier
• Office

PR number FD20200261477 Item 0001 NSN 1620010184758 PN 190421 Piston sub assy MLG Mfg of chrome plated steel 300M Wt 106 lbs Length 42 width 17 depth 22 6ea Alt qty A 38ea Alt qty B 70ea Applicable to A10 Destn Hill Air Force Base Ut 840565825 Delivery 31 DEC 2003 6 ea Alternate delivery quantities Alt A 31 DEC 2003 38 ea Alt B 31 DEC 2003 70 ea Item 0002 data 1 lot Qualification requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement The requirements of FAR 9202A have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation These qualification requirements apply to line items 0001 Electronic procedure will be used for this solicitation See our Web page To Menasco Canada To West Heights To B F Goodrich Cleveland Oh 441052054 To Coltec Industries Inc Euless Tx 760407012 To Eagle Tool First article test required Authority 10 USC 2304C1 Justification Supplies or Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements Award will be made only if the offeror the productservice or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 522091 The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firms listed An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to the source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer 8017776991 ATTENTION Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity Information on registration and annual confirmation requirements may be obtained by calling 18882272423 or via the Internet at httpwwwccr2000com This part required engineering source approval by the design control activity in order to maintain the quality of the part Existing unique design capability engineering skills and manufacturing knowledge by the qualified sources require acquisition of the part from the approved sources The approved sources retain data rights manufacturing knowledge or technical data that are not economically available to the Government and the data or knowledge is essential to maintaining the quality of the part An alternate source must qualify in accordance with the design control activitys procedures as approved by the cognizant Government engineering activity The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application This acquisition involves data that are subject to export control laws and regulations Only contractors who are registered and certified with the Defense Logistics Services Center DLSC shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions Contact the Defense Logistics Services Center 74 Washington Avenue N Battle Creek Michigan 409173084 18003523572 for further information on the certification process You must submit a copy of your approved DD Form 2345 Military Critical Technical Data Agreement with your request for the solicitation See Note s 22

• Department/Ind.Agency
• Subtier
• Office

Presolicitation NoticeDate Submitted 09 Nov 2001 OCALCLIDIA DIR AIRBORNE ACCESSORIES 3001 STAFF DR STE 1AD297E TINKER AIR FORCE BASE OK 731453028 REPAIROVERHAUL C141 Solenoid valve SOL F3460101R40337 POC Ron ReedLIDIA 405 7394340 email Ronaldreedtinkerafmil This is a requirement for Overhaul The contractor shall provide all labor facilities equipment and all material to accomplish overhaul test packing preservation and packaging of the below listed miscellaneous valves A firm fixed price MinMax Quantity Requirements type contract is contemplated The items and quantities are as follows Item 0001 Overhaul NSN 4810000547095HS PN 5C5602103 3H90027103 Noun Solenoid Valve Applicable to C141 aircraft Minimum Quantity 25 each Maximum Quantity 43 each Item 0002 Over and Above Work Item 0003 Data IAW DD1423s The approximate solicitation issue date will be 30 Nov 2001 approximate closing date will be 30 Dec 2001 Deliveries are to be at a rate as follows CLIN 0001 15 each per month 30 Days ARO reps and orders and shall be IAW instructions received from the Production Management Specialist prior to shipment Only written or faxed requests received directly from the requestor are acceptable All responsible sources solicited may submit a bid proposal quotation which shall be considered Reply fax number is 405 7394417 Attn Ron Reed Qualification Requirements Sources must be qualified prior to being considered for award The solicitation will contain instructions for obtaining further information on this requirement Authority 10 USC 2304 C1 Justification Supplies or Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one or a limited number or sources under the authority of FAR 6302 Interested persons may identify their interest and capability to respond to the requirement or submit proposals This notice of intent is not a request for competitive proposals However all proposals received within forty fivedays thirty days if award is issued under an existing basic ordering agreement after date of publication of this synopsis will be considered by the Government A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement NOTE An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call the Ombudsman at 4057363273 DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS See Note 26

• Department/Ind.Agency
• Subtier
• Office

PR Number FD20200260081 Item 0001 NSN 5998014864995AH PN 140004100 Used on the REACT printer to sense a low paper condition Approx 25 x 25 circuit card with light emitting diode Delivery To be determined 112ea Applicable to React Printer Destn Hill Air Force Base Ut 840565816 The anticipated award date will be 10 DEC 2001 Electronic procedure will be used for this solicitation See our Web page To Datametrics Corporation Orlando Fl 328093703 Authority 10 USC 2304C1 Justification Supplies or Services required are available from only one or a limited number of responsible sources and no other type of supplies or services will satisfy agency requirements Specifications plans or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer but to communicate contractor concerns issues disagreements and recommendations to the appropriate government personnel When requested the Ombudsman will maintain strict confidentiality as to the source of the concern The Ombudsman does not participate in the evaluation of proposals or in the source selection process Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer 8017776991 ATTENTION Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity Information on registration and annual confirmation requirements may be obtained by calling 18882272423 or via the Internet at httpwwwccr2000com The Government physically does not have in its possession sufficient accurate or legible data to purchase this part from other than the current sources See Note s 26

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency
• Subtier
• Office