Contract

No Description Provided

• Department/Ind.Agency
• Subtier
• Office

The General Services Administration has a Simplified Acquisition procurement for 52 Kits National Stock Number 8030013754479 Sealing Compound This item is in accordance with Emerson Cuming part number Syntac VF22 This is not an or equal procurement The material furnished must reference the part number requested Interested parties may furnish a quote via fax or email The Item purchase description and request for quotations may be downloaded from the internet address httpwwwepsgov A quote in FOB Destination terms is preferred If you have questions concerning this procurement please contact Kathy VanNatta at 816 8231718

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency TRANSPORTATION, DEPARTMENT OF
• Subtier OFFICE OF THE SECRETARY
• Office 6913G6 VOLPE NATL. TRANS. SYS CNTR

No Description Provided

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency TRANSPORTATION, DEPARTMENT OF
• Subtier OFFICE OF THE SECRETARY
• Office 6913G6 VOLPE NATL. TRANS. SYS CNTR

NEW SOD AT BASE LTA FOOTBALL FIELD Description i This combinedsynopsissolicitation for commercial items prepared in accordance with the format in FAR Subpart 126 as supplemented with additional information included in the notice ii Solicitation F4460099Q0352 is issued as a Request for Quote Quotes are requested and a written RFQ will not be issued iii The solicitation document incorporates provisions and clauses that are in effect through Federal Acquisition circular FAC 9711 and Defense Acquisition Circular 9113 Wage Determination number 942543 R20 for 11210 Grounds Maintenance Laborer applies to this contract It is the contractor responsibility to be familiar with allapplicable clauses and provisions iv This acquisition will be 100 Small Business set aside the Standard Industrial Classified Code is 0782 v The 1st Civil Engineering Squadron has a requirement for purchase and installation of new sod at the base LTA Football Field approximately 7600 square yards of sod vi The following requirements applicable are The contractor shall provide all personnel equipment materials tools supervision and other items and services necessary to perform Football Field Maintenance as defined in this Statement of Work SOW Work shall consist of the removal and disposal of the existing ground cover level the field maintaining the crown and drainage lay Bermuda grass sod and irrigate the field The contractor shall perform to the standards in this contract The estimated quantities of work are listed in Attachment 1 Workload Estimates Site Preparation Remove the existing ground cover to bare earth Site shall be free of all debris before sod is laid Dispose of the ground cover according to Federal State and Local regulations Care shall be taken to prevent any damage to the existing irrigation system The contractor at no expense to the government shall repair any damage to the sprinkler system incurred during construction Remove paint and reinstall two 2 goal post The contractor at no expense to the government shall repair any damage to the goal post incurred during construction Grading Pulverize and fine grade to level the field Fill low areas as needed Adjust and level the sprinkler heads approximately 40 to grade and fill in around them Maintain a positive crown and drainage Surveying grade stakes and drawings are to be accomplished by contractor Drawings will be provided to CES upon completion These areas shall be rolled to remove all potential and actual air pockets prior to planting Lay Sod Lay Bermuda grass sod to provide an unbroken surface except where sprinkler heads are located as identified by this contract Care shall be taken around sprinkler heads so as not to interfere with their operation Fertilize Spread fertilizer at a rate of 4 lbs per 1000 square feet Fertilizer shall be a starter fertilizer not to exceed a 101010 rating Irrigation Will be the responsibility of CES Water Shop vii Delivery Work shall begin on June 1 1999 and be completed by June 8 1999 Warranty The contractor or manufacturer standard commercial warranty shall apply viii The following FAR provisions and clauses are applicable to the procurement 522121 Instructions to OfferorsCommercial Items is hereby incorporated by reference ix Solicitation provision at FAR 522122 EvaluationCommercial Items is hereby incorporated by reference The Government will award a Purchase Order resulting from this solicitation to the responsible offeror that is most advantageous to the government The following factors will be evaluated technical capability price past performance and delivery schedule in compliance with the requirements of this solicitation all the referenced clauses with price being the most significant factor x Offerors are reminded to include a completed copy of the provision at 522123 Offerors Representations and Certifications Commercial Items and 2522127000 Offeror Representations and Certification Items with its offer Contact our point of contact for full text if necessary xi Clause 522124 Contract Terms and Conditions Commercial Items is hereby incorporated by reference xii Clause 522125 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items is hereby incorporated by reference xv Signed and dated quotes must be submitted to 1st Contracting Squadron 74 Nealy Ave Suite 201 Langley AFB VA 23665 ATTN SrA Taylor not later than 300 EST 28 May 99 xvi Contact SrA Taylor at 757 7642175 fax 757 7647447 and no collect calls A completed copy of the provision at 542123 Offerors Representations and Certification Commercial Items must be submitted with the quote Offerors submissions shall comply with the instructions set forth in the solicitation and FAR provision 522121 Instructions to Offerors Commercial Items and shall include in accordance with FAR522121 the following Technical description of the items being quoted in sufficient detail to evaluate compliance the requirements of the solicitation the terms of any express warranty price and any discounts delivery terms completed copy of the representations and certifications at FAR 522123 past performance information IAW this clause and shall include all other applicable information required by this clause TECHNICAL EXHIBIT 1 WORKLOAD ESTIMATES TYPE OF QUANITY 1 Site Preparation Debris Removal 7600 sq yd 2 Survey 7600 sq yd 3 PulverizeFine Grade 7600 sq yd 4 AdjustLevel Sprinkler Heads APPROX 40ea 5 Lay Sod 7600 sq yd 6 Fertilize 2736 lbs PRICE PROPOSAL SCHEDULE CLIN DESCRIPTION UNIT EST QTY UNIT COST EST COST 0001AA Remove Turf SQ YD 7600 Dispose of Debris 0001AB Survey Grade EA 1 0001AC PulverizeFine SQ YD 7600 Grade 0001AD Add Topsoil SQ YD 100 0001AE Adjust Sprinkler EA APPROX 40 Heads 0001AF Install Sod SQ YD 7600 0001AG MovePaint EA 2 Goal Posts Point of Contact SrA Darell Taylor Purchasing Agent Phone 757 764 2175 Fax 757 7647447 Email taylorda2langleyafmil Scott Hooven Contracting Officer Phone 757 7644918 Fax 757 7647447 Email cliffordhoovenlangleyafmil Email your questions to SrA Darell Taylor at taylorda2langleyafmil

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE AIR FORCE
• Office FA4800 633 CONS PKP

THE GOVERNMENT CURRENT DEMAND IS FOR AN ESTIMATED QUANTITY OF 200 SETS PLEASE PROVIDE PRICING AND AVAILABILITY BY MAY 28 1999WOULD LIKE TO ESTABLISH STANDING PRICE QUOTE FOR A PERIOD OF ONE YEAR DESCRIPTION AS FOLLOWS 5120003576065 UI EA RIVETER BLIND HAND DESCRIPTION In accordance with Commercial Item Description AA3043 dated 102996 Size 1 912 inch nominal length Style 1 Straight Class 2 Countersunk MUST INCLUDE RIVETER PLUS 3 HEADS WORKMANSHIP Details of workmanship shall be in accordance with the best commercial standards and practices Paints coatings platings and finishes shall be smooth dry adherent continuous and not stained or discolored Fasteners shall be firmly secured and show no evidence of deformation cross threading or hazardous burrs Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied Adhesives shall be adequately cured Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges Wire and cable insulation shall show no evidence of burns abrading or pinch marks There shall be no interference binding or galling of parts External and bearing surfaces shall be free of tool and gouge marks nicks or other surface imperfections The item shall be clean and free of corrosion and debris eg chips shavings slivers or other foreign material The item shall be free from manufacturing workmanship defects eg loose missing binding or misaligned parts sharp or rough external edges corners or surfaces and material workmanship defects eg pits rips fins burrs tears nodules cracks blisters which may adversely impact the items serviceability durability safety or appearance ITEM MARKING Each item including all items within a set or kit shall be marked with the manufacturers name and identifying symbol and the state or country of manufacture unless otherwise specified All marking shall be engraved etched molded or indented PACKAGING One 1 item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment handling and storage PACKING The unit packages shall be packed in a close fitting fiberboard box grade 200 minimum The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification MARKING All unit intermediate transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FEDSTD123 or marked and bar coded for delivery to military activities in accordance with the latest version of MILSTD129 as applicable PALLETIZATION Pallet Sizes Unless otherwise specified the pallets shall be 48 X 40 or 40 X 48 in length and width Exceptions such as 48 X 48 will be used only with the concurrence of the Office of Distribution Management FS Pallet Type Options Unless otherwise specified the pallets shall be one of the following two options 1 PPPP1660A Type I Type IA Type II or Type III The following designs are acceptable Style 2 and 7 Class B or C Grade 2 Sizes 40 x 48 48 x 40 4 way block post or partial 4 way entry stinger nonreversible 2 ASME MH18M1996 Wood Pallets An American National Standard Class 1 and 2 Category 2 Type 3 Style 2 Bottom Deck 1 Sizes 40 x 48 and 48 x 40 Pallet Load Size The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight Exceptions to this requirement shall have the concurrence of the Office of Distribution Management Pallet Load Configuration The containers or items shall be placed in a suitable pattern to form a stable and balanced load Then vertical horizontal or filler reinforcement shall be added as necessary to provide the strength necessary to support three additional palletized loads Stacking Strength The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing Palletized Load Stacking Test The palletized load as presented for shipment shall be tested for stackability The test load shall be placed on a rigid surface with three additional loads stacked on top for 24 hours The tester has the option of simulating the three additional loads with a like pallet and weight equaling three like loads Example If the pallet load weighs 1000 pounds then 3000 pounds on a like pallet shall be stacked on the test load for 24 hours Test personnel shall be responsible to test in compliance with National and local safety regulations Testing need not be repeated as long as the palletized load design and materials do not change Partial Palletized Loads Less than onehalf pallet loads do not require testing Shall not be used for stacking unless load is balanced on pallet The partial palletized load shall be used for top loading only

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency
• Subtier
• Office

No Description Provided

• Department/Ind.Agency
• Subtier
• Office

This Special notice is for information due to a problem with the original solicitation issued on 52099 we have resubmitted the solicitation in WORD format Please click on Solicitation 6FESD8980170S scroll down and click on the resubmitted version

• Department/Ind.Agency
• Subtier
• Office