Contract

Delivery Order SPRDL124F0109 was awarded on 25 April 2024 in the amount of 99364077  This is against Indefinite Delivery Indefinite Quantity Contract SPRDL120D0018  Contracting activity is DLA Land Warren

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA LAND WARREN

Sole Source for communication equipment Law Enforcement Sensitive 

• Department/Ind.Agency HOMELAND SECURITY, DEPARTMENT OF
• Subtier US IMMIGRATION AND CUSTOMS ENFORCEMENT
• Office INVESTIGATIONS AND OPERATIONS SUPPORT DALLAS

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA AVIATION

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA AVIATION

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA AVIATION

No Description Provided

• Department/Ind.Agency HOMELAND SECURITY, DEPARTMENT OF
• Subtier US COAST GUARD
• Office AVIATION LOGISTICS CENTER (ALC)(00038)

   This is a combined synopsissolicitation for commercial items prepared in accordance with the format in subpart 126 as supplemented with additional information included in this notice  This announcement constitutes the only solicitation proposals are being requested and a written solicitation will not be issued      SynopsisSolicitation N0017824Q6501 is issued as a Request for Quotation RFQ  The synopsissolicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulation as indicated in the attached SF1449  The SF1449 form is being utilized to generate the applicable clauses from the Standard Procurement System    This requirement is not eligible for small business setaside  The Naval Surface Warfare Center Dahlgren Division NSWCDD intends to procure on a Brand Name or Equal basis for Trendway Corporation and VIA seating  his procurement will provide critically needed workstations to support the requirement for additional seating for new personnel as described in the Infrastructure Board IB Space Request IBSR23009 to support the onboarding of new hire personnel and expansion of the capability In order to maintain consistency throughout the building this specific brand name furniture is required New and existing Trendway furniture will be reutilized by repurposing existing furniture into this reconfiguration design  Please include shippingfreight cost to Dahlgren VA 224485114 Simplified Acquisition Procedures SAP will be utilized for award in accordance with FAR Part 13  The order shall be firm fixed price     All responsible offerors must submit with its offer the representation required in paragraph c of FAR solicitation provision 522123 Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas or when the contracting officer has applied FAR Part 19 All offerors may submit a capability statement proposal or quotation which shall be considered by the agency  The completion and submission to the Government of an offer shall indicate the Offerors unconditional agreement to the terms and conditions in this solicitation Offers may be rejected if an exception to the terms or conditions set forth in this solicitation is taken  At time of proposal submission please submit any historical data as well as published pricing Quotes will only be accepted from authorized resellers who have provided a Letter of Authorization Award will be made based on Lowest Price Technically Acceptable  In order to be eligible for award firms must be registered in the System for Award Management SAM  Offerors may obtain information on registration in SAM by calling 8666068220 or via the Internet at httpswwwsamgov   Quote is due 26 April 2024 no later than 1600 pm EST with an anticipated award date by 30 April 2024  Questions and responses regarding this synopsissolicitation may be submitted by email to elizabethsbailey13civusnavymil prior to the RFQ closing  Email should reference SynopsisSolicitation Number   N0017824P6501 in the subject line  Attachments    SF1449 Solicitation for Commercial Items 

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE NAVY
• Office NSWC DAHLGREN

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA AVIATION

April 26 2024 Q1 Will you please clarify if this is looking for a camera plus lens or is there a system level spec or enclosure that is needed  A1 The RFI states the Government is looking for a previously developed item with minimal changes necessary for compatibility  That being said if the vendor has a camera plus lens system that they believe meets the intent of the RFI they are welcome to respond with details of their system  The minimal changes necessary for compatibility could include the addition of an enclosure that meets the LRTIM envelope specified Q2 What about performance modeled with NVIPM in the presence of Jitter Does the government want this modeled with our submission If so what level of Jitter should we model What is the minimum Threshold range requirement Is there also a desired Objective range performance requirement for Jitter A2 The vendor is welcome to additionally provide range performance NVIPM modeling results with Jitter taken into account  The USG typically uses Jitter value around 70 micro radian RMS Line of Sight Jitter  There are no specific requirements but the desire is to minimize the impact of jitter on range performance degradation to the greatest extent possible  If any techniques are used to mitigate jitter please also provide details April 26 2024 This RFI has been extended for responses until May 3 2024 and will become inactive on May 10 2024  April 11 2024 Q1 Could you describe the application a bit more Is it similar to this httpswwwbaesystemscomenusarticlehundredsmorethermalimagersslatedforusarmy A1 The USG is seeking information on thermal cameras for use with Remote Weapon Systems  This is similar to the article referenced Q2 I have just received a copy of NVIPM and plan to produce the requested simulations However if we dont have time to finish them I would like to include some of our own calculations for range performance Is that acceptable or will that disqualify us for a followon A2 The US Army Night Vision Integrated Performance Model NVIPM is the standard model used by our office to model range performance  Provided the proposal is responsive to our specific requirements we will evaluate model range performance based on the vendors calculations for range performance April 09 2024 Q Is their a targeted price point from the units ie XXX kunit A Their is no targeted price the Government is currently conducting market research through RFIs April 09 2024 This RFI has been extended for responses until April 23 2024 and will become inactive on April 26 2024  March 21 2024 Q1 digital video over compressed Gigabit Ethernet T Fast Ethernet O for high definition HD Can you please confirm if this is not reverse on Threshold and Objective Gig E 1000 MBPS has higher bandwidth compared to Fast Ethernet 100 MBPS by 10X A1 The Threshold and Objective labels are correct as is  Fast Ethernet is labeled as the Objective requirement because it requires more compression to achieve than the Threshold Gigabit Ethernet requirement which requires less compression to achieve  Q2 Could we get access to NVIPM version 16 or later please A2 Requests for the latest NVIPM version can be sent to nvlmodelsnvlarmymil  March 15 2024 Q1 Could you please provide clarification regarding the maximum envelope size specified in LRTIM envelope rev2step Specifically we are interested in understanding the size requirements especially regarding the intended Cool MWIR solution A1 The LRTIM envelope rev2step 3D model is intended to be the maximum envelope for any responses  Note this would be the maximum envelope of the entire system to include housing lenses etc Q2 Regarding the capability of the LRTIM to identify a vehiclesized target 31 by 31 meters at distances of 4000 meters T and 5000 meters O it is mentioned that range performance shall be expressed in terms of 70 percent identification ranges computed by Night Vision Integrated Performance Model NVIPM Could you please provide clarification on how this requirement translates to TRM4V2 A2 The US Army Night Vision Integrated Performance Model NVIPM is the standard model used by our office to model range performance  The European Thermal Range Model TRM4 is a similar model used to determine range performance but our office doesnt use it  Thus we cannot answer this question  Provided the proposal is responsive to our specific requirements we will evaluate model range performance based on the TRM4 March 13 2024 Q With regard to the aforementioned RFIs our technical team would like to perform the NVIPM modeling but are telling me that they need the definition of the V50s which dont seem to be in the solicitation  Could you please provide thatthose A LRTIM The identification task for these vehicle targets is defined as having a V50 of 13 cycles WATM This identification task for these personnel targets is defined as having a V50 of 9 cycles 01 March 2024 Q Can you confirm the incumbent for the above effort If so could you please provide the incumbent name as well as the contract number   A We do not currently have an incumbent 26 February 2024 Any interested parties can request the LRTIM envelope rev2step 3D Step File referenced below Please email the POCs and a DOD Safe Drop will be sent per your request  The US Army Contracting Command New Jersey on behalf of the Product Director Crew Served Weapons PdM CSW located at Picatinny Arsenal NJ is seeking information from organizations that possess a Long Range Thermal Imaging Module LRTIM for use with Remote Weapon Systems RWS Information is being sought for thermal imaging camera systems with mature technologies that can be readily modified and integrated to meet the following criteria Previously developed item with minimal changes necessary for compatibility Level of maturity shall be such that a production representative unit can be available for qualification testing within 12 months T 6 months O Passive imaging Cooled in the mid wave infrared MWIR or long wave infrared LWIR  Able to fit within maximum envelope size specified in LRTIM envelope rev2step Weight no more than 7 kg 154 lbs Power per MILSTD1275 Environmentally ruggedized Operational at temperatures of 140 degrees Fahrenheit to 50 degrees Fahrenheit The LRTIM minimum focalplane array FPA resolution in each dimension shall be 640 pixels horizontally and 480 pixels vertically T high definition resolution O Shall be capable of supporting or being easily modified to allow for digital video over compressed Gigabit Ethernet T Fast Ethernet O for high definition HD andor RS170 for standard definition SD The LRTIM shall be capable of identifying a vehicle sized target 31 by 31 meters at 4000 meters T 5000 meters O   Range performance shall be expressed in terms of 70 percent identification ranges as computed by Night Vision Integrated Performance Model NVIPM using the parameters specified in Range Performance Conditions and Definitions below   ID Range degradation in obscurant andor poor weather conditions to include light rain fog light snow mist etc shall be no more than 50 T 25 O The horizontal wide field of view WFOV shall be at least 10 degrees T 45 degrees Oin the horizontal direction 15year procurable life Mean Time Between Failures MTBF of 15000 hours O Internal auto focus capability Spurious images and noise patterns shall not be discernible over the entire field of view O Range Performance Conditions and Definitions Range performance measurementsmodellinganalysispredictions shall be those computed using the Night Vision Integrated Performance Model NVIPM version 16 or later Range performance calculations shall assume a 10 to 17 diagonal display with a resolution equal to or greater than the native resolution of the cameras The display luminance used for calculating range performance shall not exceed 20 footLamberts For calculating range performance the distance from the display to the observers eyes shall be greater than 15 cm and less than 45 cm The basic atmosphere shall be the 1976 US Standard resident in NVIPM with the ambient temperature equal to 300 K and the SkytoGround Ratio set to 10 and the turbulence defined by a Cn2 of 10 EXP15 The camera gain effected by the NVIPM component RSS Contrast Level shall not exceed 03 30 All range performance requirements shall be met without the aid of frame integration andor averaging NVIPM range shall be executed in the default mode where the target angle presented to the eye alpha is varying with range Potential sources are requested to submit at a minimum the following information Responses should be limited to no more than 20 pages with the only exceptions stated below Information papers can be submitted in a white paper format Thermal Imaging System Description Provide the description of the thermal imaging system including system growth potential Characteristics Focal Plane Array technology Cooled MWIR or LWIR size pixel count and architecture Optical telescope description Dimensions or 3D step model preferred of camera envelope model file is outside of 20 page limit Weight of system Power characteristics voltage level steady state power draw transient power draw etc Powerup time for entire temperature range 140 degrees Fahrenheit to 50 degrees Fahrenheit Input files for NVIPM to support range performance input file is outside of 20 page limit Identification Ranges at both Narrow FOV and Wide FOV and Mediumintermediate fields of view if applicable Characterize andor describe performance degradation in poor weather andor obscurant penetration Fields of view sizes horizontal and vertical in degrees and description of magnification stepslevels discrete vs continuous zoom optical vs electronic single vs multiple cameras Video output details including format resolutions and frame rate System Latency from glass to camera output at the external connector Auto focus time for accurate and repeatable focus Mean Time Between Failures MTBF Description of any spurious images and noise patterns if present Communications protocol Discussion of any special features or modes available if applicable ex image enhancement stabilization synchronization shutter type etc Environmental details Engineering and Qualification test results if available outside of 20 page limit Summary on status of product and maturity level Delivery Schedule Earliest Availability of Production Representative LRTIM Monthly production capacity Delivery lead time Prior Military Sales for stated product if applicable Program names US military or foreign military specify country or countries US Government Contract numbers US Government Point of Contact Name Email Phone Organization Quantities sold to the Military Description Standalone or as part of larger system Cost LRTIM NonRecurring Cost for minimal compatibility changes LRTIM Unit Production Cost based on quantity of systems 14 549 50199 200 above Risks LRTIM Risk Integration Risk Other Export Restrictions if applicable Vendor Questionnaire The purpose of this questionnaire is to obtain information from industry to assist in the market research Firmscompanies are invited to indicate their interest and capability to satisfy the above requirements by identifying the following items 1 Company Name 2 Company Address Country Represented Website 3 Company point of contact and phone number 4 Business Size SmallLarge Number of Employees CAGE Code DUNS Number 5 The North American Industry Classification System NAICS codes for this effort are 333314 6 Commerciality a Our product as described above has been sold leased or licensed to the general public b Our product as described above has been sold in substantial quantities on a competitive basis to multiple state and local governments The development of the product was done exclusively at private expense c None of the above applies Explain 7 Location where primary work will be performed if more than one location please indicate the percentage for each location 8 Major partners or suppliers 9 Identify existing facilities equipment and workforce identify what percentage would be supporting this new effort and what additional resources would be required 10 Provide minimum and maximum monthly production rates of past production of same or similar items 11 Please provide any additional comments All responsible interested offerors are encouraged to submit their capabilitiesqualification data and any pertinent information in hard copy or via email within 30 calendar days to US Army Contracting Command New Jersey ATTN Angelica Merino ACCNJSL Building 9 Phipps Road Picatinny Arsenal NJ 078065000 Email angelicammerinocivarmymil The point of contact is Angelica Merino at angelicammerinocivarmymil or Stacey Conner at staceyrconnercivarmymil TELEPHONE RESPONSES AND INQUIRIES WILL NOT BE ACCEPTED The Government will accept written questions by email to the above This is a request for information only and should not be construed as a Request for Proposal or a commitment by the US Government The US Government does not intend to award a contract on the basis of this market survey All information is to be submitted at no cost or obligation to the Government If a formal solicitation is generated at a later date a solicitation notice will be published and more detailed technical requirements will be provided Respondents will not be notified of the results of this survey or results of information submitted Any information provided will not be returned Contracting Office Address ACC New Jersey Center for Contracting and Commerce Building 9 Phipps RD Picatinny Arsenal NJ 078065000

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE ARMY
• Office W6QK ACC-PICA

No Description Provided

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA LAND AND MARITIME