Contract

Title DSI Ponemah Software for the Critical Care Medicine Department at the NIH Clinical Center Product Service Code 6640 NAICS Code 334516 Place of Performance Bethesda MD 20892 USA POTS 24006997 Description This is a notice of intent NOT a request for a quotation A solicitation document will NOT be issued and quotations will NOT be requested The National Institutes of Health NIH intends to award a firm fixed price purchase order to Data Sciences International Incorporation of Saint Paul Minnesota 551123929   The purpose of this acquisition is to procure a telemetry platform from DSI that monitors and records continuous physiologic data such as heart rate and blood pressure through implantable telemetry devices The platform will provide monitoring during nonhuman primate models of infectious diseases that cause high rates of mortality in humans Continuous and faithful monitoring of physiologic parameters over time is essential for deep characterization of disease progression Critically the implantable telemetry platform enables monitoring in sedated or awake animals Physiologic parameters could alternatively be measured by inserting a device via percutaneous femoral arterial access but this method requires continuous sedation and does not allow for measurement of physiologic parameters in awake animals Below is a description of the item requested for this requirement Part Number                            Description                             Quantity PNMP3PCFG                       Ponemah Software System       1 The proposed vendor Data Sciences International Incorporation is the sole manufacturer of the proprietary Ponemah software used within its telemetry platform This acquisition is being conducted using policies unique to the Federal Acquisition Regulation FAR Part 13 Simplified Acquisition Procedures Subpart 131061b1 For purchases not exceeding the simplified acquisition threshold SAT contracting officers may solicit from one source if the contracting officer determines that the circumstance of the contract action deem only one source reasonably available  Contracts awarded using FAR Part 13Simplified Acquisition Procedures are exempt from the requirements of FAR Part 6Competition Requirements Interested parties may identify their interest and capabilities in response to this posting The determination by the Government not to compete the proposed requirement based upon responses to this notice is solely within the discretion of the Government Comments to this announcement referencing this posting number may be submitted to the Office of Purchasing and Contracts prior to the closing date specified in this announcement electronically to the attention of Shasheshe Goolsby Lead Contract Specialist shasheshegoolsbynihgov by May 10 2024 630AM EST Please send your capability statements ONLY This IS NOT a request for proposal

• Department/Ind.Agency HEALTH AND HUMAN SERVICES, DEPARTMENT OF
• Subtier NATIONAL INSTITUTES OF HEALTH
• Office NATIONAL INSTITUTES OF HEALTH - CC

W912EE

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE ARMY
• Office W07V ENDIST VICKSBURG

Prospective vendors shall provide fully loaded pricing for two separate Skid steer brush cutter attachment to fit a CAT 299 D3XE  Please review the schedule of items for the core mandatory salient characteristics that each attachment must provide  Alternate attachments that can accomplish these main salient characteristics that are not CAT brand may also be proposed  Please see the corresponding Provisions section for your technical package requirements prior to submitting  Delivery End Destination to Delivery address Winn District Office 12319 US Hwy 84W Winnfield LA  71483 Point of Contact for all Technical Related Questions Contact Jason Beaubouef For inbound truck driver assistance Office 3183025808 Cell  3186630627                   Estimated Delivery Date 1 June 2024

• Department/Ind.Agency AGRICULTURE, DEPARTMENT OF
• Subtier FOREST SERVICE
• Office USDA FOREST SERVICE

No Description Provided

• Department/Ind.Agency AGRICULTURE, DEPARTMENT OF
• Subtier FARM PRODUCTION AND CONSERVATION BUSINESS CENTER
• Office FPAC BUS CNTR-ACQ DIV

AVSO Land Appraisal for KSN241 AVIS E05330202400004 Case ID 00222025

• Department/Ind.Agency INTERIOR, DEPARTMENT OF THE
• Subtier DEPARTMENTAL OFFICES
• Office IBC ACQ SVCS DIRECTORATE (00004)

This is a combined synopsissolicitation for commercial itemsservices prepared in accordance with the format in FAR Subpart 126 as supplemented with additional information included in this notice This announcement constitutes the only solicitation quotations are being requested and a written solicitation will not be issued This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 200565 dated January 29 2013 The NAICS Code is 336611 The small business size standard is 1250 This is a total small business set aside All responsible sources may submit proposals that will be considered by the agency The contract will be awarded on a firmfixedprice basis using simplified acquisition procedures in accordance with FAR Part 135 The United States Coast Guard Surface Force Logistics Center has a requirement for the following The CTR shall provide  1  SCOPE 11 Intent This work item describes the requirements for the Contractor to perform load testing of designated Ship Service Diesel Generator ie SSDG listed in Table 1 TABLE 1 LIST OF SHIP SERVICE GENERATOR EQUIPMENT MANUFACTURER MODEL NUMBER DESCRIPTION LOCATION SWITCHBOARD SSDG No3 Caterpillar 3512B 1360 kW 450 VAC 60 Hz 3 phase 1800 RPM 08 power factor Diesel Generator Room 2765E SS Switchboard No3 S   LOAD TESTING OF DESIGNATED SSDG WILL BE IDENTIFIED BY COR 12 Governmentfurnished property None 2  REFERENCES Coast Guard Drawings Coast Guard Drawing 418AWMSL100001 Rev A General Arrangements Coast Guard Drawing 750WMSL501002 Rev E Machinery Arrangements ASC501001 Coast Guard Publications Surface Forces Logistics Center Standard Specification 0000 SFLC Std Spec 0000 2022 General Requirements Coast Guard Technical Publication TP 7119 Ship Service Diesel Generators Model 3512B Coast Guard Technical Publication TP 7165B Ship Service Switchboards 1S 2S 3S 1SP Shore Power Operation Maintenance Installation Volume 1 Coast Guard Technical Publication TP 7166B Ship Service Switchboards 1S 2S 3S 1SP Shore Power Operation Maintenance Installation Volume 2 4 Coast Guard Technical Publication TP 7167 Ship Service Switchboards 1S 2S 3S 1SP Shore Power Operation Maintenance Installation Volume 3 Other References COMDTINST 90771 series Equipment LockoutTagsPlus Instruction MILSTD1310 Sep 2009 Shipboard Bonding Grounding and Other Techniques for Electromagnetic Compatibility and Safety 3  REQUIREMENTS 31 General 311 CIR None 312 Tech Rep  None 313 Protective measures  The Contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000 paragraph 333 Vessel component space and equipment protection 314 Interferences  The Contractor must handle all interferences in accordance with SFLC Std Spec 0000 paragraph 335 Interferences Known interferences include but are not limited to the following Piping Electrical Cables Switchboard Vent Ducting Motor Operated Valves 315 Background information  SSDG listed in Table 1 will be modified by the Coast Guard for the following task Bearing Replacement Laser Alignment Pinning and Machine Work 3151 After completion of above listed tasks by the Coast Guard the intent of this Work Item is for the Contractor to perform load testing of designated SSDG listed in Table 1 32  Work location  The concerned work area is listed in Table 1  See the applicable drawings in References in Paragraph 2 for guidance locations and details  33 Grounding  The Contractor must bond and ground each cable in accordance with MIL STD1310  Note If the load bank is placed on the Pier then its frame must be insulated from the concrete If the load bank is mounted on the flatbed truck the tires will accomplish the isolation An equipment ground 40 Awg conductor must be run from the load bank to the ship hull 34 Contractor Furnished Materials CFM  The Contractor must furnish materials listed in the Table 2 for load testing of the SSDG listed in Table 1 TABLE 2 CONTRACTOR furnish MATERIALS MATERIALS description SOURCE OF SUPPLY Load Bank 1500 KW 450 Volt AC 3 Phase 60 Hz Resistive Electrical Equipments Rental Company Load Bank Cables Approximate length of 300 Feet Cables with ring tongue compression lugs 6 Paralleled 40 copper load bank conductors per phase 18 Total x 300 Feet and one additional length for the equipment grounding conductor or Six LSTSGU400 Two Cables at each Phase Tony Santiago Murray Benjamin Electric 397 West Ave Stamford CT 06902 2037052100 OR Any Electrical Cable Supplier 341 The contractor must provide miscellaneous hardware required for electrical installation ie Nylon Stuffing Tubes Box Connectors Lugs Fasteners Wire Nuts Tapes Cable ties Cable Mounting Brackets etc of the electrical equipment WARNING Complete Red Danger Tags In ACCORDANCE with COMDTINST 90771 series 35 Load testing  The Contractor must provide labor and crane services as necessary for placing load bank at suitable location ie On the pier or the ship After completion of load bank testing of SSDG the Contractor must remove all installed equipment and cables used during testing 351 Testing plan The Contractor must submit a plan for load testing of the SSDG in accordance with Caterpillar Publication SEBF901126 and TP 7119 Submit the load testing plan no later than one week after the Arrival Conference in a CFR 3511 The plan must cover the following topics at a minimum Emergency shutdown procedures Load bank specification and location Cable locations for load bank Noload tests Loaded tests Data to be collected during tests All proposed connections cable and load bank configurations 3512 The Contractor must start testing of the SSDG after COR Approval of submitted Test Plan and official acceptance by the Contract Officer KO 352 After placing load bank at suitable location ie On the pier or the ship the Contractor must install the cables from the load bank to associated SS Switchboard bus bars ie  Back side of SS Switchboard No1 or No2S or No3S  CAUTION THE BACK SIDE OF THE SWITCHBOARD SHOULD BE ROPED OFF AS A PERSONNEL EXCLUSION AREA APPROXIMATELY 10 FOOT RADIUS FROM ANY VISIBLE LIVE BUS 3521 The Contractor must route the cables from designated SSDG to load bank through hatches and passageway The Contractor must run cables in overheads as much as possible to avoid trip hazards NOTE Coast Guard personnel will operate all shipboard machinery and equipment SAFETY At any point in the load test or operational testing period if the need presents itself the engine Prime mover may be shut down by the Tech rep with communication to the USCG operational Engineer utilizing the local EOS E stop or shut down from the switch gear  Any of the three options will automatically open the SSDG buss breaker 353 After warmup of SSDG until coolant temperature reaching 140 Degree F the Contractor must perform the load testing of designated SSDG listed in Table 1 at following load condition TABLE 3 LOAD TESTING LOAD HOURS  No Load 05 Hrs 25 Load 05 Hrs 50 Load 05 Hrs 75 Load 05 Hrs 100 Load 20 Hrs No Load 05 Hrs Running no load testing No load testing will consist of running the engine at idle rpm until the engine coolant temperature reaches 140 deg F during that warmup time safety testing will be performed for oil psi and temp warning and shut down and coolant temp warning and shutdown Shipboard alarm verification will be observed at that time as well 3531 Load bank readings must be taken every 15 minutes of the following parameters Engine Coolant temp oil pressure battery voltage boost intake air temp after the aftercooler exhaust stack temp left and right bank In addition to the generator load test form a Caterpillar steady state engine performance file shall be recorded on the engine ECM all related available information Generator information voltage reading per phase amperage readings per phase HZ bearing and winding temps if installed Pre and posttest PSSRP shall be saved on the ECM to provide verification of all available diagnostic codes and events All electronic files and reports must be sent to the COR and distributed through proper channel 4 Load test documentation  After completion of testing the Contractor must provide Data Sheet of load testing of SSDG to the Contracting Officer 4  NOTES This section is not applicable to this work item RDDPOP 1317MAY2024 Delivery address and ATTN to CGC Stratton 1 Eagle Rd Alameda CA 94501

• Department/Ind.Agency HOMELAND SECURITY, DEPARTMENT OF
• Subtier US COAST GUARD
• Office SFLC PROCUREMENT BRANCH 2(00085)

NSN 1H4730017064429X2 TDP VER 001 QTY 6 EA DELIVER TO N75000 RECEIVING OFFICER KITTERY ME 039045000 ISSUE TO NATSTAR DEFENSE INC BOCA RATON FL 334333487 This notice of intent is not a request for competitive quotes and the proposedcontract action is for supplies or services for which the Government intends to negotiate with only one sourece Interested persons may identify their interest and capability to respond to the requirement or submit quotes Quotes received prior to the award date will be considered by the GovernmentA determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement The Government has rights to the technical data the data package is complete and there are no technical data engineering tooling or manufacturing restrictions This is the only ARMSC that implies that parts are candidates for full and open competition Other ARMSCs such as K M N Q and S may imply limited competition when two or more independent sources exist yet the technical data package is inadequate for full and open competition ARMCs 1 or 2 are valid

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEPT OF THE NAVY
• Office NAVSUP WEAPON SYSTEMS SUPPORT MECH

No Description Provided

• Department/Ind.Agency VETERANS AFFAIRS, DEPARTMENT OF
• Subtier VETERANS AFFAIRS, DEPARTMENT OF
• Office 245-NETWORK CONTRACT OFFICE 5 (36C245)

No Description Provided

• Department/Ind.Agency VETERANS AFFAIRS, DEPARTMENT OF
• Subtier VETERANS AFFAIRS, DEPARTMENT OF
• Office 245-NETWORK CONTRACT OFFICE 5 (36C245)

Delivery Order SPRDL124F0119 was awarded on APR222024 in the amount of 10955700  This is against  Indefinite Delivery Indefinite Quantity  Contract  SPRDL121D0036  Contracting activity is DLA Land Warren

• Department/Ind.Agency DEPT OF DEFENSE
• Subtier DEFENSE LOGISTICS AGENCY
• Office DLA LAND WARREN